Search Results Key
| Column Name |
Meaning |
| WELL ID |
Unique ID assigned by OWRB |
| WELL NAME |
Name or Number of the well given by the owner or driller |
| COUNTY |
County where the well is located |
| OWNER NAME |
Name of the well owner at the time the well was drilled |
| QTRS |
Quarter sections |
| SEC-TWP-RGE |
Section, Township and Range |
| LATITUDE - LONGITUDE |
In decimal degrees. This may not closely represent the actual well location. Drillers are only required to locate well to the center of the closest 10 acre tract. Therefore the actual location may vary from a few feet to 400 feet. Method latitude and longitude was collected can be found by viewing the online "Well Completion Report". |
| DATE CONST |
Date well was constructed |
| DPC NO |
Driller/pump contractor license number for the firm that drilled the well.
The DPC number was started around 1990. |
| USE |
See table below |
| WELL TYPE |
See table below |
| TD |
Total depth of the well in feet |
| MEAS WL |
Depth to water measured by OWRB staff |
| EST YLD |
Estimated yield of the well in gallons-per-minute |
| SURF ELEV |
Estimated surface elevation of the well in feet |
| FIRST ZONE |
Depth at which the driller first encountered water while drilling |
| STATIC WL |
The water level measured by the driller immediatly after drilling. |
Well Types and Uses
| Well Type |
Well Use |
| Groundwater Well |
Agriculture, Commercial, De-watering, Domestic, Industrial, Institutional, Irrigation, Mining, Observation Well, Piezometer, Power, Public Water Supply, Recharge, Recreation, Fish and Wildlife |
| Groundwater Test Hole |
Water Location |
| Geothermal or Heat Pump |
Heat Exchange |
| Cathodic Protection or Anode Well |
Corrosion Protection |
| Monitoring Well |
Air Sparging, Vapor Extraction, Pump and Treat,Site Assessment, Water Quality |
| Geotechnical Boring |
Soil Evaluation |